Converting the world

TECNIWATER

COATING AND LAMINATING LINES

TECNIWATER NARROW WEB
– Speed: up to 300 mpm
– Web Width: from 600 to 1200 mm

TECNIWATER 150
– Speed: up to 150 mpm
– Web Width: from 1300 to 2000 mm

TECNIWATER 300
– Speed: up to 300 mpm
– Web Width:  from 1600 to 2000 mm

SUITABLE TO HANDLE:
– Acrylic water emulsion PSAdhesive
– Natural rubber latex water-based adhesive
– Primer / release if required on product application.

PRODUCTS:
– BOPP tapes
– PE tapes
– Laminated tapes
– Protective films
– Labels
– Acetate
– Paper

描述

Every line is custom made, design upon customer’s specification request.

MAIN STANDARD CHARACTERISTICS

  • Automatic unwinder  (different models for any need)

Reels holding an locking by means of pneumatic shafts or shaftless

Automatic changeover and splice in one or both directions

  • Adhesive coating unit

Coating head: Mayer bar unit, single or double type, coating roll, side doctor knives, web deviation rolls

  • Driven pull unit – or vacuum roll
  • Adhesive drying tunnel

High efficiency horizontal ovens, shall opening type; film conveyance by means of idle or driven rolls.

Thermal blower modules: integrated or separated

  • Draw and cooling unit with water cooled cylinders with thermal exchange high capacity
  • Automatic winder ( different models for any need )

Turret type, with lay on roll and minimum gap

“Independent arms” type for NO waste during changeover

 FITTINGS AND OPTIONS

  • Reels loading – unloading systems
  • Film stretching calanders group
  • Primer and/or Release coating and  drying  units
  • Corona treatment stations
  • I.R. oven to accelerate water evaporation
  • Other types of drying ovens: both side vertical opening type, air flotation type, driven conveyor belts type….
  • Heat exchangers for energy recovery
  • Other type of applicable adhesive coating heads:  rotogravure or reverse roll system
  • Humidification systems
  • Adhesive feeding equipment to the coating head
  • Secondary unwinder with lamination group
  • Weight measuring system: total basis weight type or differential synchronized measuring type
  • Supervision system with industrial PC for process and production control.
  • Horizontal lathe for Mayer bars winding

Main standard characteristics

• Automatic unwinder (different models for any need)
– Reels holding an locking by means of pneumatic shafts or shaftless
– Automatic changeover and splice in one or both directions

• Adhesive coating unit
– Coating head: Mayer bar unit, single or double type, coating roll, side doctor knives, web deviation rolls

Driven pull unit – or vacuum roll

Adhesive drying tunnel
– High efficiency horizontal ovens, shall opening type; film conveyance by means of idle or driven rolls.
– Thermal blower modules: integrated or separated
Draw and cooling unit with water cooled cylinders with thermal exchange high capacity

Automatic winder (different models for any need)
– Turret type, with lay on roll and minimum gap
– “Independent arms” type for NO waste during changeover

 

Fittings and options

• Reels loading – unloading systems
• Film stretching calanders group
• Primer and/or Release coating and drying units
• Corona treatment stations
• I.R. oven to accelerate water evaporation
• Other types of drying ovens: both side vertical opening type, air flotation type, driven conveyor belts type….
• Heat exchangers for energy recovery
• Other type of applicable adhesive coating heads: rotogravure or reverse roll system
• Humidification systems
• Adhesive feeding equipment to the coating head
• Secondary unwinder with lamination group
• Weight measuring system: total basis weight type or differential synchronized measuring type
• Supervision system with industrial PC for process and production control.
• Horizontal lathe for Mayer bars winding

返回