Converting the world

TECNISOLVENT

COATING AND LAMINATING LINES

TECNI-SOLVENT 200
– Speed: up to 200 mpm
– Web width: from 1200 to 2000mm

TECNI-SOLVENT 400
– Speed: up to 400 mpm
– Web width: from 1200 to 2000mm

TECNI-MASK
(Coating line to produce Masking tapes)
– Speed: up to 200 mpm
– Web width: from 1200 to 2000mm

SUITABLE TO HANDLE:
– Natural rubber solvent based pressure sensitive adhesive
– Acrylic solvent based pressure sensitive adhesive
– Primer / Release solvent based solutions if required for product application.
– Water based adhesives

PRODUCTS:
– BOPP tapes
– PVC tapes
– Mono-adhesive tapes (PET, OPP..)
– Masking tapes
– Electrical tapes
– Double side tapes (no woven, film…)
– Special products

描述

Every line is custom made, design upon customer’s specification request.

MAIN STANDARD CHARACTERISTICS

  • Automatic unwinder  (different models for any need)
  • Primer/Release coating and drying unit
    • Rotogravure system with “closed chambre doctor blade” or Mayer bar
    • Primer/release feeding and recycle systems with tanks and pumps
    • Vertical or horizontal hot air drying ovens with thermal blower modules
  • Adhesive coating unit
    • Coating head: rotating knife type, with knife and applicator rolls, parallel or overlapped arranged, prearranged for automatic correction
    • Vacuum driven pull in exit
  • Adhesive drying tunnel
    • High efficiency horizontal ovens, shall opening type, film conveyance by means of idle or driven rolls
    • Thermal blower modules: integrated or separated
      • Each module can be dedicated to 1 or 2 sections of ovens
      • Air heating with thermal oil, steam or overheated water batteries, or gas burners
  • Equipment and devices for solvent prevention
    • Insulating cabinets
    • LEL monitoring systems (I.R. or Flame Temp. Analyser type)
  • Draw and cooling unit with water cooled cylinders
  • Anti-surface treatment
    • For coating units inside frames and after coating web contact rolls. Eventually for nozzles and rolls inside release/primer/adhesive drying ovens.
  • Automatic winder (different models for any need)
  • Equipment and devices for the good control of the web
    • (Spreader rolls, antistatic devices, tension control devices…)

FITTING AND OPTIONS

Coating line can be equipped with:

  • Reels loading-unloading systems
  • Film stretching calenders group
  • Corona treatment stations
  • Other type of applicable adhesive coating heads
    • Mayer bar, reverse roll, “comma” roll system…
  • Other types of drying ovens:
    • Both sides vertical opening type, air flotation type, driven conveyor belts type…
  • Heat exchangers for energy recovery
  • High temperature curing ovens
  • Humidification system
  • Secondary unwinder with lamination group
  • Delaminating group with liner rewinder
  • Web pre-conditioning groups: heated calenders or I.R. plates
  • Web cleaning treaters
  • Web surface inspection and monitoring system
  • Coat thickness/basis-weight measuring system:
    • Total basis weight type or differential synchronized measuring type, with eventually automatic adjustment of the coating die
  • Supervision system with industrial PC

Main standard characteristics

• Automatic unwinder (different models for any need)

• Primer/Release coating and drying unit
Rotogravure system with “closed chambre doctor blade” or Mayer bar
Primer/release feeding and recycle systems with tanks and pumps
Vertical or horizontal hot air drying ovens with thermal blower modules

• Adhesive coating unit
Coating head: rotating knife type, with knife and applicator rolls, parallel or overlapped arranged, prearranged for automatic correction
Vacuum driven pull in exit

• Adhesive drying tunnel
High efficiency horizontal ovens, shall opening type, film conveyance by means of idle or driven rolls
Thermal blower modules: integrated or separated
– Each module can be dedicated to 1 or 2 sections of ovens
– Air heating with thermal oil, steam or overheated water batteries, or gas burners

• Equipment and devices for solvent prevention
Insulating cabinets
LEL monitoring systems (I.R. or Flame Temp. Analyser type)

• Draw and cooling unit with water cooled cylinders

• Anti-surface treatment
For coating units inside frames and after coating web contact rolls. Eventually for nozzles and rolls inside release/primer/adhesive drying ovens.

• Automatic winder (different models for any need)

• Equipment and devices for the good control of the web
(Spreader rolls, antistatic devices, tension control devices…)

Fittings and options

Coating line can be equipped with:
• Reels loading-unloading systems
• Film stretching calenders group
• Corona treatment stations
• Other type of applicable adhesive coating heads

Mayer bar, reverse roll, “comma” roll system…
• Other types of drying ovens:

Both sides vertical opening type, air flotation type, driven conveyor belts type…
• Heat exchangers for energy recovery
• High temperature curing ovens
• Humidification system
• Secondary unwinder with lamination group
• Delaminating group with liner rewinder
• Web pre-conditioning groups: heated calenders or I.R. plates
• Web cleaning treaters
• Web surface inspection and monitoring system
• Coat thickness/basis-weight measuring system:

Total basis weight type or differential synchronized measuring type, with eventually automatic adjustment of the coating die
• Supervision system with industrial PC

返回